How to

How to install shower standing handles: a step-by-step guide

How to install shower standing handles: a step-by-step guide

If you’re looking to add some extra stability to your shower, or if you have young children or elderly family members who could benefit from the addition of shower standing handles, this step-by-step guide will show you how to install them in no time. In just a few minutes, you can add handles that will make getting in and out of the shower much easier and safer for everyone.

why install shower standing handles?

There are many reasons to install shower standing handles. Perhaps the most obvious reason is that they provide support and stability for those who have difficulty standing in the shower.

Another reason to install shower standing handles is that they can help prevent falls. Slipping and falling in the shower is a leading cause of injuries in the home, so anything you can do to reduce the risk of a fall is worth it.

Finally, shower standing handles can also be used as grab bars, which can be helpful for those with mobility issues. Grab bars provide an extra level of support and security when getting in and out of the shower, and they can also be used to steady yourself while bathing.

What you need: list of tools and materials

Assuming you would like an article discussing what tools and materials one might need for various activities: 

Different activities require different tools and materials. For example, if you are going to be painting your nails, you will need a few supplies. These supplies might include a nail file, cuticle pusher, base coat, top coat, polish remover, cotton balls, and paper towels. On the other hand, if you are going knit a scarf, you will need different supplies. These might include yarn, knitting needles, and pattern instructions. Before beginning any activity, it is important to do your research and make sure you have all of the necessary tools and materials on hand.

Step 1: measure and mark the wall

In this article, we’ll show you how to install shower standing handles. The first step is to measure and mark the wall. To do this, you’ll need a tape measure and a pencil.

Start by measuring the width of the shower opening. Then, measure the height of the shower opening. Once you have these measurements, you’ll need to mark the center of the shower opening on both the width and height measurements.

Next, use your tape measure to find the studs in your wall. Once you’ve located them, mark them with your pencil. Now you’re ready to start installing your shower handles!

Step 2: drill pilot holes

Installing shower standing handles is a quick and easy project that can be completed in just a few minutes. The first step is to drill pilot holes in the wall for the handle mounting screws. Drill the pilot holes using a 3/16″ drill bit and drill through the center of the provided plastic wall anchors. Wall anchors are not required but they will provide extra support for the handle.

Step 3: attach the mounting bracket

In this final step of the installation process, you will attach the mounting bracket to the shower wall. This bracket will serve as the support for your new shower standing handles. With a few simple tools, you can easily install your new handles in no time.

To begin, locate the desired position for your new handles on the shower wall. Once you have found the perfect spot, use a drill to create pilot holes for the screws. Next, place the mounting bracket over the pilot holes and secure it in place with screws.

Now it is time to attach your new shower standing handles to the bracket. Simply line up the holes on the handle with those on the bracket and insert screws. Be sure to tighten these screws until they are snug, but do not overtighten them or strip the threads.

Step 4: secure with screws

If you’re installing new standing shower handles, you’ll need to use screws to secure them in place. Here’s a step-by-step guide on how to do it:

1. Start by unscrewing the old shower handles from the wall. If there are any screws or other hardware that are still attached to the wall, remove those as well.

2. Next, line up your new shower handles with the holes in the wall. Make sure they’re level and even before proceeding.

3. Once you’re happy with their placement, use a drill to screw the new handles into place. Start with the top screw first, then work your way down.

4. Tighten each screw until the handle is snug against the wall. Don’t over tighten, or you risk striping the screws or damaging the handle itself.

Step 5: install the handle

Stand up straight and grip the top of the handle with your left hand. Unscrew the old handle by turning it to the left. With your right hand, reach behind the wall and unscrew the retaining nut that holds the valve in place. Remove any washers or old packing material from around the stem of the valve. Place a washer over the end of the valve stem and screw on the new handle clockwise until it is finger tight.


After reading this article, you should now know how to install shower standing handles. This is a relatively easy task that can be completed in a few simple steps. First, you will need to gather the necessary tools and materials. Next, you will need to remove the old shower handle. Finally, you will need to install the new shower handle. By following these simple steps, you can easily install shower standing handles in your bathroom.

Most Popular

To Top
India and Pakistan’s steroid-soaked rhetoric over Kashmir will come back to haunt them both clenbuterol australia bossier man pleads guilty for leadership role in anabolic steriod distribution conspiracy